1. product pro?le 1.1 general description symmetrical n-channel junction fets in a sot23 package. 1.2 features n high-speed switching n interchangeability of drain and source connections n low r dson at zero gate voltage ( < 8 w for pmbfj108). 1.3 applications n analog switches n choppers and commutators n audio ampli?ers. 2. pinning information [1] drain and source are interchangeable. pmbfj108; pmbfj109; pmbfj110 n-channel junction fets rev. 03 4 august 2004 product data sheet table 1: pinning pin description [1] simpli?ed outline symbol 1 drain 2 source 3 gate sot23 12 3 sym053 1 2 3
9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 2 of 8 philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 3. ordering information 4. marking [1] * = p: made in hong kong * = t: made in malaysia * = w: made in china 5. limiting values [1] mounted on an fr4 printed-circuit board. 6. thermal characteristics [1] mounted on an fr4 printed-circuit board. table 2: ordering information type number package name description version pmbfj108 - plastic surface mounted package; 3 leads sot23 pmbfj109 pmbfj110 table 3: marking type number marking code [1] pmbfj108 38* pmbfj109 39* pmbfj110 40* table 4: limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit v ds drain-source voltage (dc) - 25 v v gso gate-source voltage - - 25 v v gdo gate-drain voltage - - 25 v i g forward gate current (dc) - 50 ma p tot total power dissipation t amb =25 c [1] - 250 mw t stg storage temperature - 65 +150 c t j junction temperature - 150 c table 5: thermal characteristics symbol parameter conditions typ unit r th(j-a) thermal resistance from junction to ambient [1] 500 k/w
9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 3 of 8 philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 7. static characteristics 8. dynamic characteristics [1] test conditions for switching times are as follows: v dd = 1.5 v, v gs =0vtov gsoff (all types); v gsoff = - 12 v, r l = 100 w (pmbfj108); v gsoff = - 7 v, r l = 100 w (pmbfj109); v gsoff = - 5 v, r l = 100 w (pmbfj110). table 6: static characteristics t j =25 c. symbol parameter conditions min typ max unit i gss gate-source leakage current v gs = - 15 v; v ds =0v - - - 3na i dsx drain-source cut-off current v gs = - 10 v; v ds =5v - - 3 na i dss drain-source leakage current pmbfj108 v gs =0v; v ds =15v 80 - - ma pmbfj109 v gs =0v; v ds =15v 40 - - ma pmbfj110 v gs =0v; v ds =15v 10 - - ma v (br)gss gate-source breakdown voltage i g = - 1 m a; v ds =0v - - - 25 v v gsoff gate-source cut-off voltage pmbfj108 i d =1 m a; v ds =5v - 10 - - 3v pmbfj109 i d =1 m a; v ds =5v - 6- - 2v pmbfj110 i d =1 m a; v ds =5v - 4- - 0.5 v r dson drain-source on-state resistance pmbfj108 v gs =0v; v ds = 0.1 v - - 8 w pmbfj109 v gs =0v; v ds = 0.1 v - - 12 w pmbfj110 v gs =0v; v ds = 0.1 v - - 18 w table 7: dynamic characteristics t j = 25 c unless otherwise speci?ed. symbol parameter conditions min typ max unit c iss input capacitance v ds =0v; v gs = - 10 v; f = 1 mhz - 15 30 pf v ds =0v; v gs = 0 v; f = 1 mhz; t amb =25 c - 50 85 pf c rss feedback capacitance v ds =0v; v gs = - 10 v; f = 1 mhz - 8 15 pf switching times (see figure 2 ) t d delay time [1] -2-ns t on turn-on time [1] -4-ns t s storage time [1] -4-ns t off turn-off time [1] -6-ns
9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 4 of 8 philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets fig 1. switching circuit. fig 2. input and output waveforms. 001aab288 50 w r l dut 10 m f 0.1 m f v dd 10 nf 50 w sampling scope 50 w 001aab289 - v gs off t off t f t s v gs = 0 v v i v o 10% 90% 90% 10% t on t r t d
9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 5 of 8 philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 9. package outline fig 3. package outline. unit a 1 max. b p cd e e 1 h e l p qw v references outline version european projection issue date 97-02-28 99-09-13 iec jedec eiaj mm 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 0.95 e 1.9 2.5 2.1 0.55 0.45 0.1 0.2 dimensions (mm are the original dimensions) 0.45 0.15 sot23 to-236ab b p d e 1 e a a 1 l p q detail x h e e w m v m a b a b 0 1 2 mm scale a 1.1 0.9 c x 12 3 plastic surface mounted package; 3 leads sot23
9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 6 of 8 philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 10. revision history table 8: revision history document id release date data sheet status change notice order number supersedes pmbfj108_109_110_ 3 20040804 product data sheet - 9397 750 13401 pmbfj108_109_110_ cnv_2 modi?cations: ? the format of this data sheet has been redesigned to comply with the new presentation and information standard of philips semiconductors. ? t ab le 3 mar king : added new marking code. pmbfj108_109_110_ cnv_2 19971201 product speci?cation - not applicable -
philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 9397 750 13401 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 03 4 august 2004 7 of 8 11. data sheet status [1] please consult the most recently issued data sheet before initiating or completing a design. [2] the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the l atest information is available on the internet at url http://www.semiconductors.philips.com. [3] for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. de?nitions short-form speci?cation the data in a short-form speci?cation is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values de?nition limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the speci?cation is not implied. exposure to limiting values for extended periods may affect device reliability. application information applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. 13. disclaimers life support these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change noti?cation (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise speci?ed. 14. contact information for additional information, please visit: http://www.semiconductors.philips.com for sales of?ce addresses, send an email to: sales.addresses@www.semiconductors.philips.com level data sheet status [1] product status [2] [3] de?nition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn).
? koninklijke philips electronics n.v. 2004 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: 4 august 2004 document order number: 9397 750 13401 published in the netherlands philips semiconductors pmbfj108; pmbfj109; pmbfj110 n-channel junction fets 15. contents 1 product pro?le . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description. . . . . . . . . . . . . . . . . . . . . . 1 1.2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 1 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 thermal characteristics. . . . . . . . . . . . . . . . . . . 2 7 static characteristics. . . . . . . . . . . . . . . . . . . . . 3 8 dynamic characteristics . . . . . . . . . . . . . . . . . . 3 9 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5 10 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 6 11 data sheet status . . . . . . . . . . . . . . . . . . . . . . . . 7 12 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 13 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 14 contact information . . . . . . . . . . . . . . . . . . . . . 7
|
